Cub Cadet Challenger Series Service Manual page 89

Hide thumbs Also See for Challenger Series:
Table of Contents

Advertisement

Procedure if No Fluid is Passing Through the Right Rear Caliper
20. Confirm that the Master Cylinder reservoir is full.
21. Perform the brake bleeding procedure on the right front caliper as described in Steps 4
through 14 until brake fluid flows.
22. If brake fluid flows after three (3) consecutive times, proceed to Step 3 through 19 for the
"Brake System Bleed Procedure".
23. If fluid does not flow after five (5) attempts at the right front caliper, close the bleeder valve
and move to the left front caliper.
24. Perform the brake bleeding procedure on the left front caliper as described in Steps 4
through 14 until brake fluid flows.
25. If brake fluid flows after three (3) consecutive times, proceed to Step 3 through 19 for the
"Brake System Bleed Procedure".
26. If brake fluid does not flow after 5 attempts, replace the master cylinder and start with Step
1 of the "Master Cylinder Bleed Procedure" then Follow Steps 1 through 19 of the "Brake
System Bleed Procedure".
Periodic Maintenance
3‐24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Challenger 550Challenger 750

Table of Contents