Adjusting The Select Lever Shift Rod - Cub Cadet Challenger Series Service Manual

Maintenance and Adjustments of the UV
1. Make sure the bleed screw is tight and
add fluid to the reservoir to the full
line.
Warning:
Before operating the vehicle always
check the operation of the brakes after
bleeding the brakes.
ADJUSTING THE SELECT LEVER
SHIFT ROD
① Neutral
② High
③ Low
④ Reverse
⑤ Parking
⑥ Select lever shift rod
Periodic Maintenance
Warning:
The vehicle must be stopped and your
foot off the accelerator pedal before
shifting to prevent damage to the
transmission.
1. Adjustment of the shift lever rod.
3‐25
Make sure the select lever is in the
•
neutral position.
Loosen both locknuts (1).
•
• Adjust the rod.
• Tighten the locknuts.