Download
Share
Print this page
Cub Cadet Challenger 400 Series Operator's Manual
  1. Manuals
  2. Brands
  3. Cub Cadet Manuals
  4. Utility Vehicle
  5. Challenger 400 Series
  6. Operator's manual

Cub Cadet Challenger 400 Series Operator's Manual

4x2
Hide thumbs

Advertisement

Quick Links

Introduction • Safe Operation Practices • Controls & Operation • Product Care • Specifications • Warranty
O

Table of Contents

Introduction ............................................................. 2
Safe Operation Practices ........................................ 3
Controls & Operation .............................................. 7
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
NOTE: This Operator's Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
peratOr
Utility Vehicle
Challenger 400 Series 4x2
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
'
M
s
anual
Product Care ...........................................................12
Specifications ..........................................................17
Warranty .................................................................19
WARNING
Form No. 769-14390B
(August 31, 2020)

Advertisement

loading
Need help?

Need help?

Do you have a question about the Challenger 400 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cub Cadet Challenger 400 Series

Summary of Contents for Cub Cadet Challenger 400 Series

  • Page 1: Table Of Contents

    Introduction • Safe Operation Practices • Controls & Operation • Product Care • Specifications • Warranty ’ peratOr anual Utility Vehicle Challenger 400 Series 4x2 Table of Contents Introduction ............. 2 Product Care ............12 Safe Operation Practices ........3 Specifications ............17 Controls &...

  • Page 2: Introduction

    Introduction Thank You Thank you for purchasing a Cub Cadet Utility Vehicle. It was carefully engineered If applicable, the power testing information used to establish the power rating of to provide excellent performance when properly operated and maintained. the engine equipped on this vehicle can be found at www.opei.org or the engine manufacturer’s web site.

  • Page 3: Safe Operation Practices

    Safe Operation Practices WARNING This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING! WARNING California Proposition 65...
  • Page 4 Never attach ropes, chains or cables to Never remove gas cap or add fuel Do Not: the OPS for pulling purposes. while the engine is hot or running. Do not travel near drop-offs, ditches or Allow engine to cool at least 5 minutes Although the OPS, when used with a embankments.
  • Page 5 Notice Regarding Emissions Spark Arrestor DO NOT pour oil or other fluids into the ground, down a drain or into a stream, Gasoline powered products may be equipped pond, lake or other body of water. Observe WARNING with the following emission control systems: Environmental Protection Agency regulations Engine Modification (EM), Oxidizing Catalyst (OC), when disposing of oil, fuel, coolant, brake fluid,...
  • Page 6 Symbol Description WARNING— SLOPES Do not operate on slopes greater than 15°. M AX 15º WARNING— CRUSH HAZARD Keep hands and other body parts safely away when lowering cargo bed. WARNING — GAS CONTAINER OR OTHER FLAMMABLE LIQUIDS Avoid injury from explosion or fire. Do not carry fuel or other flammable liquids in vehicle or cargo bed. WARNING—...

  • Page 7: Controls & Operation

    Controls & Operation Parking Brake Indicator (If equipped) (e) The Parking Brake Indicator will illuminate when the parking brake is engaged. Low Voltage Indicator (f) The Low Voltage Indicator will illuminate when battery reaches 11.6 volts. Fuel Level Indicator (g) The Fuel Level is divided into 5 segments and flashes at the lowest increment.
  • Page 8 NOTE: Seat belt warning indicator will flash for 8 carefully inspected and, if necessary, replaced seconds once the key is turned to the ON position to by your Cub Cadet dealer. Do not attempt to remind the operator and passenger to fasten their repair the OPS.
  • Page 9 Cup Holders (O) Starting Engine Driving Utility Vehicle Adjust the operator’s seat to the most The cup holders are located on top of the dash panel WARNING comfortable position that allows you to on both the left and right hand sides. operate all controls and pedals.
  • Page 10 Loading the Cargo Bed Raise and re-latch the tailgate to the cargo bed. Go slow when towing a heavy load. Allow See Figure 3-8 and Figure 3-9. Do not drive the for increased braking distance. Tow load at a vehicle with tailgate in the lowered position. speed slow enough to maintain control.
  • Page 11 • Capacity: Utility vehicles are not evenly Place the ramp fingers or plate edges on the Storage Box (if equipped) balanced, meaning it’s necessary to check the edge of the trailer or truck bed. See Figure 3-12. There is an optional storage box located under the axle weights before you make any choices hood.

  • Page 12: Product Care

    Check proper function before each use. Replace seat IMPORTANT: When reattaching cover, make belt assembly if any damage is found. If damage is certain that the cap is pointing downward. noted, contact your Cub Cadet dealer. See Figure 4-1 inset. Lug Nuts Figure 4-2 Turn the plug counter-clockwise and allow oil to Check torque of lug nuts after first 10 hours of use.
  • Page 13 Parking Brake Adjustment Housing If the vehicle’s rear wheels can roll with the parking Element brake set, then the parking brake is in need of adjustment. See your Cub Cadet dealer to have the Drain Screw brake properly adjusted. Plug...
  • Page 14 Clean terminals and battery cable ends with Raise and secure hood. Remove the four lug nuts and the wheel. wire brush until bright. Raise the driver’s seat. To change the brake pads, follow the steps below. Apply petroleum jelly or silicone spray to Remove the appropriate electrical fuse and Removing Brake Pads terminals to prevent corrosion.
  • Page 15 If still hard to shift, Drive Belt Shock contact your nearest Cub Cadet dealer. IMPORTANT: See your Cub Cadet dealer to have Indicator lights do not come on when key your drive belt replaced. switch is in START position Troubleshooting •...
  • Page 16 Engine loses power Starter cranks slowly Vehicle will not move • Engine overheating. • Low battery output. • Shift Lever still in Neutral. • Too much oil in engine. • Dead or faulty battery. • Parking Brake is still set. •...

  • Page 17: Specifications

    Specifications Challenger 400 Models NOTE: Specifications subject to change without notice. Engine/Electrical Dimensions Make Subaru, EX40 Length/ Width 98.6” x 49.0” (98.6” x 51.6” w/ roof) Type/ Cylinders 4 Cycle Gas/ 1 Cylinder Tread Center F: 41.8”/ R: 39.5” Displacement 404cc Height (Overall) 75.2”...
  • Page 18 Notes...

  • Page 19: Warranty

    CUB CADET LLC -- LIMITED WARRANTY The limited warranty set forth herein is given by Cub Cadet LLC with respect to a new Cub Cadet® product (hereinafter “Product”) purchased and used in the United States and/or Canada to the Initial Purchaser (as defined herein). This limited warranty does not cover Emission Control Systems and is not a Federal Emission Control Warranty Statement, as defined by U.S.
  • Page 20 Website at www.cubcadet.ca. This limited product warranty is RESPECT TO ANY, PRODUCT SHALL BIND CUB CADET LLC. DURING provided by Cub Cadet LLC and is the only product warranty provided by Cub THE WARRANTY PERIOD, THE EXCLUSIVE REMEDY IS REPAIR OR Cadet LLC for the Product.