Yeastar Technology NeoGate TA3200 How To Connect page 6

How to Connect Trixbox to NeoGate TA FXS Gateway
Figure 4. Create Extension 300 on Trixbox
Step 2. Configure one VoIP server template on NeoGate TA3200.
Path: Gateway→VoIP Settings→VoIP Server Settings
Check "Enable Register", fill in the Trixbox's IP address, this VoIP server
template will be a VoIP mode template.
Figure 5. Configure the VoIP Server Template as VoIP Mode
Server Name: Trixbox
Type: SIP
Enable Register: checked
Transport: UDP
Hostname/IP: fill in the Trixbox IP address, 192.168.5.236
Domain: fill in the Trixbox IP address, 192.168.5.236
Step 3. Edit the Dial Pattern Template
Path: Gateway→VoIP Settings→VoIP Server Settings
The default dial pattern is set as ".", which allows you to dial any number out. In
this guide, we will remain the default setting. You can change it according to
your environment.
6/15