Introduction; Preparation - Yeastar Technology NeoGate TA3200 How To Connect

How to Connect Trixbox to NeoGate TA FXS Gateway

1. Introduction

This application note shows how to connect Trixbox to NeoGate TA FXS gateway.
This guide has been tested with NeoGate TA3200 and Trixbox firmware version:
2.8.0.4.
Two modes are available for NeoGate TA to connect to Trixbox, we call them
VoIP trunk mode and Service Provider SIP/IAX trunk mode (SPS/SPX).
*You can simply choose one mode to achieve the connection.
Target：
After connecting NeoGate TA3200 and Trixbox, FXS extensions will be extended
on Trixbox. Once the FXS ports are connected to Trixbox, the phones connected
to the FXS ports will be treated as Trixbox FXS extensions. The following
features can be achieved:
1. Make calls between the analog phone and Trixbox SIP extension;
2. Receive incoming calls on the analog phones;
3. Make external calls from the analog phones using trunks on Trixbox.
Description：
IP address of Trixbox: 192.168.5.236
IP address of NeoGate TA3200: 192.168.5.13
Figure 1. Connect Trixbox and NeoGate TA3200

2. Preparation

NeoGate TA3200 attempts to contact a DHCP server in your network to obtain
3/15