How to Connect Trixbox to NeoGate TA FXS Gateway
Step 5. Create one outbound route on Trixbox.
To make calls from Trixbox to NeoGate TA3200, you need to create one
outbound route on Trixbox.
Path: PBX→PBX Settings→Outbound Routes→Add Route
Figure 18. Add Outbound Route
Set the dial pattern as X., choose the trunk "NeoGate_TA3200" which is created
above. In this guide, you should dial 100 to call the phone which is connected to
TA3200 FXS port 1.
<End>
15/15