Table of Contents
Advertisement
2.4. Scanning Reply
The radio detects the active channel/call group when
scanning, the radio stays at the channel/call group for
listening (this is called the "scan hanging time" preprogram-
ming time limit), and the LED indicator light is bright green.
The scan stays on the non-priority channel, and the display
icon is
. If it stays in priority channel 1 or 2, the displays
icon is
P1
of
P2
.
Scanning reply process：
1) Hold the radio and put it in a vertical position and
maintain a distance of 1 to 2 inches (2.5 to 5 centimeters)
with the mouth. If the "channel available hint" is enabled,
when the transmitter is released [PTT] key, you will hear a
short note, which indicating that the channel is available
and waits for your answer.
2) Press [PTT] key during the hanging time, and the LED
indicator is red.
3) Release [PTT] key to listen.
4) If you do not respond within the hanging time, the radio
will continue to scan.
3. MESSAGE FUNCTION
The radio supports DMR data function, and can send and
receive messages. It can store up to 100 incoming
messages and 100 sent messages. The maximum length of
each message is 220 characters, and the number of SMS
lines cannot exceed 50 lines.
46
3.1 Edit and Send Messages
User menu function：
1) Press [MENU] key to enter the main menu.
2) Press [
] / [
] key to Messages, then press [MENU]
key to select
3) Press [
] / [
] key to Write, then press [MENU] key to
select
4) There is a scintillation cursor, input SMS with the
keyboard, move one bit to the left by pressing [
one to the right by [
] , delete any useless character when
the editing area has content, or return to the previous menu
when the editing area has no content.
5) After writing the text message, press [MENU] key to
return to the previous menu quickly and find contacts, then
press [MENU] key to select.
6) Press [
] / [
] key to the desired user alias or ID, then
press [MENU] key to select.
•Or press [
] / [
] key to enter the manual dialing and
input the target radio ID, then press [MENU] key to select.
7) Screen display "Sending..." make sure that a message is
being sent.
8) If the message is sent successfully, a prompt will be
issued, and the screen will display "Message Sent".
• Or if the message is not sent successfully, a high pitched
tone will be issued, and the screen will display "Msg Send
Failed"..
] , move
47
Hide quick links:
Advertisement
Table of Contents
