Restart Emergency Mode; Exit Emergency Mode; Lone Worker - Retevis RT72 User Manual

10. Restart Emergency Mode

It can happened in two situations:
•When the transceiver is in emergency mode and changes
channel, it will exit emergency mode. If an emergency alert
is activated on the new channel, the transceiver resumes
the emergency call.
•Press preprogrammed [Emergency On] key in the
emergency call start/transmit state. This way the radios will
exit the status and restart the emergency call.

11. Exit Emergency Mode

The transceiver exits emergency mode when one of the
following happened:
• Receive emergency alert confirmation (emergency alerts
only), or
• The number of major attempts to send an alert has been
reached, or
• Press Preprogrammed [Emergency Off] , or
• Press [PTT] key.
Note: If the radio is turn off, it will exist the emergency
mode. When turned on again, the radio will not restart
emergency mode

12. Lone Worker

This feature is ideal for people who work alone. If you
encounter unexpected situations during individual opera-
tion, you can't operate the radio in preset time.
30
The radio will automatically send alarm to your partner or
control center for help.
1) Turn on individual operation
● Through programming software, this function is turned on
when the radio is started.
2) If you do not operate the radio in the preset response
time, the radio will prompt before the response time is up
(depending on the dealer settings). At this point, you can
end the prompt with a valid physical operation (knob or key
operation). When the response time is up, the radio will
automatically turn on the alarm system of the current
channel.
3) Turn off individual operation
● Turn this function off by programming software.
Note: If you do not turn off the individual operation function
before shutting down, the function is still active the next
time you turn on the radio.
31