Product View And Parts Identification; Status Indication; Led Indicators; Description Of Lcd Icons - Retevis RT72 User Manual

RADIO OVERVIEW

State indicator
lamp
PTT
Microphone
SK1
SK2
MENU
MENU
1
4
7

1. Status Indication

1.1. LED Indicators

This product has LED indicators so you can easily grasp
the current operating state.
Indicator status
Red on
Product status Transmitting
02
Antenna
LED Indicator
Loudspeaker
Mic/Spk/Write
Frequency Port
LCD
BACK
BACK
2 3
Battery Pack
5 6 0
8 9 #
Green on Green flash
Receiving Scanning

1.2. Description of LCD Icons

Icon
Icon name Description of product status
The more signal bars, the stronger the signal is
Signal strength icon
Transmission The current channel transmits at high power
H
power icon The current channel transmits at low power
L
Direct mode slot The current sub-audio is CTCSS
icon The current sub-audio is CDCSS
Speaker icon Speaker is enabled, and reception is effective
The current transmission frequency is the reception
+
Relay mode icon frequency plus a frequency bias (positive bias)
The current transmission frequency is the reception
-
frequency minus a frequency bias (negative bias)
Currently in offline state
Scan icon The scan is on and is in normal mode
Non-priority channel Scan stays on non-priority channel
Priority channel 1 P1 Scan stays on priority channel 1
Priority channel 2 P2 Scan stays on priority channel 2
The more bars, the more battery power
Battery power icon
VOX icon Voice control is turned on
V
Currently pointing to the main digital mode; press A/B
button to switch the main channel up and down.
D
When double-waiting is turned on and works in digital
Pointer icon sub-channel, the icon is
Currently pointing to the main analog mode; press
A/B button to switch the main channel up and down.
A
When double-waiting is turned on and works in
analog sub-channel, the icon is
D
A
03