Table of Contents
Advertisement
1.3.5.1 Initiate Radio Enable
1) Press [MENU] key to enter the main menu.
2) Press [
] / [
] key to Contacts, then press [MENU]
key to select.
3) Press [
] / [
] key to Digital Contacts, then press
[MENU] key to select.
4) Press [
] / [
] key to the desired user alias or ID, then
press [MENU] key to select.
5) Press [
] / [
] key to Application, then press [MENU]
key to select.
6) Press [
] / [
] key to Radio Enable, then press
[MENU] key to select, the screen displays "Radio Active..."
7) When the radio sends a remote activation command, the
LED indicator lights up as a red light.
8) If you receive the confirmation of the remote activation,
the prompt tone will be issued and the screen displays"
Radio Active OK"
• Or if you do not receive the confirmation of the remote
activation, a prompt is issued, and the screen displays"
Radio Active Fail"
1.3.5.2 Receive Radio Enable
After receiving the command of the remote enable, activate
the prompt tone and turn off and turn on the radio again.
Note: The remote disable radio can also be activated by
programming software. This function only can work by
setting up and opening the function by programming
software.
42
2. SCAN
Scanning means that when radio scanned on a channel
and has activities, it will stay on the channel for listening, so
as to understand the current activities of the relevant group
members.
The scanning list is a list of channels for radio scanning. Your
radio can support 32 scanning lists at most, and each list has
a maximum of 16 channels. Each scanning list supports the
mixing of analog and digital channels. You can edit can lists
to add/remove channels or set priorities for channels.
2.1 Start and Stop Scanning
Press preset [Scan] key or enter the scan menu function.
The menu operation is as follows:
1) Select a pre programmed scan list channel by pressing
[
] / [
] key.
2) Press [MENU] key to enter the main menu.
3) Press [
] / [
] key to Scan, then press [MENU] key to
select.
4) Press [
] / [
] key to Scan Switch, then press [MENU]
key to select.
5) The screen displays the "ON" and "OFF" options, press
[
] / [
] key to ON, and then press [MENU] key to
confirm and activate scan. The LED indicator slowly flashes
to orange and displays the scan icon
•If you press [
] / [
] key to OFF, then press [MENU] to
confirm and off scan. When the scan is turned off the LED
indicator lights off and the scan icon is not displayed.
；
43
Hide quick links:
Advertisement
Table of Contents
