IBM 5280 User's Setup Manual page 77

10
5. The auxiliary data station cables attach to the IBM 5288. The IBM
5288 data station sockets are color coded green and numbered 0
through 3. Read the following three steps (a, b, and c) before con-
necting the data station cable.
a. Find a cable connector with a green label. Read the identification
label.
For example, if you find a cable with the following label, this cable
connects to socket 0 on the IBM 5288.
Data Station ca~ble
Machine Type XXXX
Location - - -
Socket
..Q.
From the IBM 5281 or 5282
To Socket 0 on the IBM 5288
b. Position the cable so that the green label is on top; then push
the cable into the socket.
Green Label
Note: If the cable end does not fit easily into the socket, be sure that
the connector guides line up with the socket guides.
c. Make sure that the snap-locks lock into position.