IBM 5280 User's Setup Manual page 147

140
84. Observe this display.
Magnetic stripe reader tested
Stripe was read correctly.
Press ENTER 52-05
l~
_ _ _ -----""J
85. If the display in step 84 appears, go to step 86.
If the display in step 84 does not appear, go to step M1.
M 1. If the following display appears, repeat the test by
running the test card through the magnetic stripe reader
and checking for the display in step 84. If the display in
step 84 does not appear, call your service
representative.
Magne~ic stripe reader tested
Stripe reader error
52--06
J
M2. If the following display appears, press the Enter key
and repeat the test by running the test card through the
magnetic stripe reader and checking for the display in
step 84. If the display in step 84 does not appear, call
your service representative.
Magnetic stripe reader tested
Badge data Miscompare
Press ENTER 52-07
l~
_ _ _
---,J