IBM 5280 User's Setup Manual page 114

7. Press the Enter key and observe this display.
This display is for your information. The Xs shown in this display will be
numbers supplied by your system.
Keyboard
infor~ation
for this system
OX Total number of keyboards connected to this syste~
XXXK Display storage size
ENTER
to continue
~)O-'02
]
Note: The number supplied by your system for "Total number of keyhoards
connected to this system" is the total keyboard capability you ordered, not
the physical number of keyboards you have attached.
8. Press the Enter key and observe this display.
Press the number 2
51,-01
l~
____________ J
9. Press the number 2.
Do not press the Enter key. If your keyboard has two keys with the
number 2 on the keytops, you can use either key.
B 1. If you pressed a key other than the number 2,
observe this display and press the Enter key. Then
rekey the number 2.
The number 2 was not pressed.
Press ENTER to reshow proMPt.
51-03
l
J
User's Setup Procedures 107