IBM 5280 User's Setup Manual page 4

Use this publication only for the purpose of setting up the
IBM 5280 System.
This manual is divided into ten sections. Section 1
provides information about what should have been done
prior to set,up. Sections 2 through 6 provide procedures
for setting up the IBM 5281,5282,5286,5285, and 5288
respectively.
Section 7 provides the procedures for labeling the
system. Section 8 provides a procedure for running the
verification program. The program checks the devices
after you have set them up. Section 9 presents the
procedures for connecting the communications lines to
the IBM 5280'system; Section 10 provides general
instructions for disconnecting and relocating your system.
Preface
The tabs on the side of the manual indicate the name of
the procedure in each section.
This manual should be used after your devices are
unpacked and placed where you intend to use them.
When you have finished setting up and verifying the IBM
5280 system, save one of the User's Setup Procedures
manuals by placing it in the Machine Verificatio(1 binder.
Preface iii