IBM 5280 User's Setup Manual page 150

90. If you have the second application program microprocessor on your
system, continue with the following steps.
If you do not know if you have the second application program microprocessor,
contact the person who did the planning for your system or the manager of
the area where your system is located.
If you do not have the second application program microprocessor, go to
step 94.
91. Move to keyboard 0 and do the following:
a.
Make sure that the verification diskette is in diskette drive 4000.
b. Key TPROC after the words Program name.
c. Press the Field+ or Field Exit key.
d. Key 4000 after the words Device address.
e. Press the Enter key.
Nl. If the second application program microprocessor can-
not function at all, the following prompt appears:
The TPROC tesi d~d not cOffipLete~
If your system has the feature
~nstalled,
ca
l i your sei-V
j
ce j-epresent at i ve ..
If not, IPL the Verification diskette 10 continue nthe~ te~ts~
t
61-01
J
- - - - - - - - - - " ' "
N2. If this screen appears and you have the second appli-
cation program microprocessor on your system, call
your service representative. If this screen appears and
you do not have the second application program
microprocessor on your system, go to step 94.
N3. If the second application program microprocessor fails
in any other way, the following prompt appears:
Satt 'taUT service Tepresenf.;"ti·.je ..
t, __
P;_'?_5S_f_NT_~~_'
______________________________ 6_'i-_O_2 ____
~)r
N4. Call your service representative. Press the Enter key.
User's Setup Procedures 143