IBM 5280 User's Setup Manual page 153

146
94. You have completed the system checkout procedure for your
IBM 5280 Distributed Data System.
Place the verification diskette and blank 2D diskette (if used) in their
protective envelopes and insert them in the holders provided in the IBM
binder containing the IBM 5280 Machine Verification Manual. Place the
magnetic stripe reader test card (if used) in the
sam~
holder with the verifi-
cation diskette. If you have a communication adapter on your system, go
to Section 9 of this manual. If you do not plan to use the system for any
other programs, set the Power switches of all machines in your system to
o
(Off). The next step is to start the system using the IBM-supplied IPL
(Initial Program Load) diskette and run the system configuration program.
See the IBM 5280 System Control Program Reference/Operation Manual,
GC21-7824 for this procedure.