IBM 5280 User's Setup Manual page 93

86
23. One or more maintenance information manuals are shipped with
each machine. Please be sure to keep these manuals handy.
The service personnel will need these manuals to maintain your
equipment.
Label the IBM binder(s) that came with your device (if they
have not been labeled) by doing the following:
a. Open an IBM binder and cut out the identification tab printed on
the back cover of each manual.
b. Fold the identification tabs (except for the first tab) in the
following manner:
Note: Depending on the binder, you may only have two tabs to insert.
MANUAL NAME
•• 1..-_ _ _ _ ..,.
MANUAL NAME
c. Insert the tabs into the plastic cover found on the binder, as
shown below:
MANUAL NAME
MANUAL NAME
MANUAL NAME
Plastic Cover
24. Go to Section 7,
Labeling Your System,
and perform the labeling
procedures for each device. After you have completed
labeling your system, you will be sent to Section 8,
Verification
Procedures.