Technical data
Control circuit terminals on the SDCS-CON-H01
The control circuit terminals are common for all sizes H1 ... H8.
Location of the control circuit board SDCS-CON-H01
The SDCS-CON-H01 is mounted on an electronic tray. The electronic tray is attached in the housing by means
of two hinges.
Recommended wire size - Tightening torques
Control cables:
Wire sizes:
0.5 ... 2.5 mm2 (24 ... 12 AWG)
Tightening torques:
0.5 Nm (5 lbf·in) for both stranded and solid wiring
3ADW000480R0101 DCS880 Quick guide e a
15
Technical data