Common User Tasks - ABB DCS880 Quick Manual

Common user tasks

This following tables list common user tasks and describe how to complete them.
See Functions in the main Menu and Functions in the Options menu for detailed descriptions of functions in the
menus.
Basic operation of the drive
Task
Start and stop the drive.
Set the reference (for example, speed) in the Home view.
Switch between local and remote control.
Parameters
Task
Choose parameters displayed on the Favorites list.
View/edit parameters.
View parameters that differ from Application Macro defaults.
System information and help
Task
How to get help.
View control panel version.
View drive information.
Faults and warnings
Task
Hide/view an active fault.
Open help page on a fault.
Reset an active fault.
View tripping faults.
Hide/view an active warning.
Open help page on a warning.
Reset an active warning.
View past warnings and faults.
Basic settings and assistants
Task
Change language.
Change time and date, and related settings.
Launch an assistant.
Backups
Task
Create a backup.
Restore a backup.
Actions
In local control, press to start the drive and to stop the drive.
In local control, go to Options > Reference.
Set the reference with the arrow keys.
Press REM/LOC
Actions
Go to Menu > Parameters > Favorites > Edit.
Go to Menu > Parameters to view parameters.
Move by arrow keys and save using left soft key.
Go to Menu > Parameters > Modified.
Actions
Press to open the context-sensitive help.
Go to Menu > System info > Control panel.
Go to Menu > System info > Drive.
Actions
Faults are automatically displayed. If you hide a fault by pressing
(Hide), it automatically reappears after 60 seconds of no key
presses.
You can also view the fault through Options > Fault status.
Press to view the help page.
Press (Reset) to reset an active fault.
Go to Menu > Event log > Primary faults.
Warnings are automatically displayed. If you hide a warning by
pressing (Hide), it automatically reappears if the warning is still
active after 60 seconds of no key presses.
Press (How to fix) or to view the help page.
Warnings disappear automatically once the condition that has
triggered it goes away.
Go to Menu > Event log > Other events.
Actions
Go to Menu > Settings > Language.
Go to Menu > Settings > Date & time.
Go to Menu > Assistants and select an assistant to launch.
Actions
Creates an backup of firmware parameters to the panel.
Restores a backup to the firmware parameters of DCT880. It is
mandatory to set the unit in local mode before.
3ADW000480R0101 DCS880 Quick guide e a
19
Using the control panel