Wenger Tuba Rest Assembly Instructions

For wenger nota chairs

ONTENTS

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Fastener Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Replacement Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Tuba Rest Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Note: Please read and understand the Tuba Rest Assembly Instructions before attempting

installation, assembly, or use.

Note: Remove all items from the shipping containers and sort the components by type, size, etc.

Refer to the illustrations on the following pages. If you need additional information, contact the

Wenger Corporation using the information listed below.

©Wenger Corporation 2007

Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 733-0393 • International (call collect): (507) 455-4100 • www.wengercorp.com

Printed in USA 01/07

Assembly Instructions

Tuba Rest

for Wenger Nota™ Chairs

Part #190A186-01

Table of Contents

Need help?

Do you have a question about the Tuba Rest and is the answer not in the manual?

Page 1 Tuba Rest Assembly ........
Page 2 Remove all items from the shipping carton. ARRANTY The Wenger Tuba Rest is guaranteed free of defects in materials and workmanship for five full years. Our guarantee assures you of either a full refund or repair or replacement of the defective materials or workmanship without charge, at the discretion of our Customer Service Department.
Page 3 EPLACEMENT ARTS Item Qty Description Base Assembly Rest Assembly Screw, Self Tapping, ” Hex Head Adapter Bracket Cap Screw, -18 x 1 ” Hex Head Washer, Flat, ” ID...
Page 4 SSEMBLY Bottom View of 1. Place the Nota Chair upside down on a table, bench, or floor surface Adapter Bracket covered with a pad or blanket to protect the seat and back surfaces. 2. Pre-cut the Adapter Bracket mounting hole threads in the pre-punched holes of the chair frame using the ”...