Firmware - TP-Link TL-WA5110G User Manual

3. Click Save.
Click the Get GMT button to get GMT time from the Internet if you have connected to the Internet.
If you're using Daylight saving time, please follow the steps below.
1. Select Using Daylight Saving Time.
2. Enter daylight saving begin time and end time in the right blanks.
Note:
1 This setting will be used for some time-based functions such as firewall. You must specify
your time zone once you log in to the router successfully, if not, the time limited on these
functions will not take effect.
2 The time will be lost if the router is turned off.
3 The router will obtain GMT automatically from the Internet When it connects to Internet.

4.13.2 Firmware

The page (shown in Figure 4-52) allows you to upgrade the latest version firmware to keep your
router up-to-date.
New firmware is posted on
upgrade the firmware unless the new firmware has a new feature you want to use. However,
when experiencing problems caused by the AP itself, you can try to upgrade the firmware.
Note:
When you upgrade the router's firmware, you will lose current configuration settings, so make
sure you backup the router's settings before you upgrade its firmware.
To upgrade the router's firmware, follow these instructions:
1. Download the latest firmware upgrade file from the TP-LINK website
2. Click Browse to view the folders and select the downloaded file.
3. Click the Upgrade button.
Firmware Version - Displays the current firmware version.
Hardware Version - Displays the current hardware version. The hardware version of the
upgrade file must accord with the current hardware version.
Note:
Do not turn off the router or press the Reset button while the firmware is being upgraded.
1
The router will reboot after the Upgrading is finished.
2
Figure 4-52 Firmware Upgrade
www.tp-link.com and can be downloaded for free. There is no need to
53
(www.tp-link.com).