Update The Firmware; Auto Update - TP-Link TL-WA1201 User Manual

Chapter 8
4. In IP Address To Ping
send ping packets to.
5. In Ping Interval field, enter the time interval between two continuous ping packets.
6. In Startup Delay
when the device is restarted.
7. In Fail Count To Reboot
continuously. If ping failures reaches the value, the device will restart automatically.
8. Click SAVE.
8. 5.

Update the Firmware

TP-Link is committed to improving product features, giving you a better network
experience.
We will inform you through the web management page if there's any new firmware
available for your access point. Also, the latest firmware will be released at the TP-Link
official website www.tp-link.com, and you can download it from the
free.
Note:
• Make sure the latest firmware file matches the hardware version (as shown in the download section of
the Support page).
• Make sure that you have a stable connection between the access point and your computer. Wired
connection is recommended.
• Back up your access point's configurations before firmware update.
• Do NOT turn off the access point during the firmware update.
8. 5. 1.

Auto Update

1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System > Firmware
3. Enable Auto Update.
field, enter the IP address of the target host that you want to
field, enter the time delay before the first ping packet is sent out
field, enter a number of ping count(s) that the device can send
Update.
Manage Your Access Point
Support page for
48