TP-Link TL-WA5110G User Manual page 31

Note:
In AP Client Router, there is only Client mode available
there is only Access Point mode available
Access Point - Access Point mode allows wireless stations including AP clients to access
the router.
•
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the
Wireless AP will broadcast its name (SSID) on the air.
Client - In Client mode, AP will act as a wireless station to enable wired host(s) to access
wireless AP.
Figure 4-12 Wireless Mode
shown as Figure
23
shown as Figure 4-12
4-14.
while in AP Router