Chapter 5. Configuring The Device In Ap Operation Mode; Login; Status - TP-Link TL-WA5110G User Manual

54m high power wireless access point

Hide thumbs Also See for TL-WA5110G:

Table of Contents

Chapter 5. Configuring the Device in AP Operation

Mode

This Chapter describes how to configure some advanced settings for your Access Point through

the web-based management page in AP operation mode.

After your successful login, you can configure and manage the Access Point. There are eight

main menus on the left of the Web-based management page. Submenus will be available after

you click one of the main menus. The eight main menus are: Status, Quick Setup, Operation

Mode, Network, Wireless, DHCP, Wireless Settings and System Tools. On the right of the

Web-based management page, there are the detailed explanations and instructions for the

corresponding page. To apply any settings you have altered on the page, please click Save.

The detailed explanations for each Web page key's function are listed below.

The Status page displays the AP's current status and configuration. All information is read-only.

Wired - This field displays the current settings or information for the Network, including the

MAC address, IP address and Subnet Mask.

Wireless - This field displays basic information or status for wireless function, including

Figure 5-1

Table of Contents

Show Quick Links

Table of Contents