Quick Setup; Operation Mode; Network; Lan - TP-Link TL-WA5110G User Manual

This field displays the router's traffic statistics.
5. System Up Time
The total up time of the router since it was powered on or reset.

4.3 Quick Setup

Please refer to Section

4.4 Operation Mode

The AP supports three operation mode types, AP Client Router, AP Router and AP. Please
select one your want. Click Save to save your choice. Figure 4-2:
AP Client Router: In this mode, the device enables multi-user to share the Internet from
WISP. All LAN ports share the same IP from WISP through Wireless port. While connecting to
WISP, the Wireless port works as a WAN port in AP Client mode. The Ethernet port acts as a
LAN port.
AP Router: In this mode, the device enables multi-user to share the Internet via ADSL/Cable
Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless
port acts same as a LAN port while in AP mode.
AP: In this mode, the device allows wireless communication devices to access a wireless
network by using WIFI. The Ethernet port and the wireless port both work as LAN ports.

4.5 Network

Figure 4-3 the Network menu
There are three submenus under the Network menu (shown in Figure 4-3): LAN, WAN and MAC
Clone. Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.

4.5.1 LAN

You can configure the IP parameters of LAN on this page.
3.2: "Quick Setup."
Figure 4-2 Operation Mode
15