Password; Syslog - TP-Link TL-WA5110G User Manual

Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
•
Change LAN IP Address. (System will reboot automatically)
•
MAC Clone (system will reboot automatically)
•
DHCP service function.
•
Static address assignment of DHCP server.
•
Web Service Port of the router.
•
Upgrade the firmware of the router (system will reboot automatically).
•
Restore the router's settings to factory default (system will reboot automatically).

4.13.8 Password

This page (shown in Figure 4-58) allows you to change the factory default user name and
password of the router.
It is strongly recommended that you change the factory default user name and password of the
router. All users who try to access the router's Web-based utility or Quick Setup will be prompted
for the router's user name and password.
Note:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.

4.13.9 Syslog

This page (shown in Figure 4-59) allows you to query the logs of the router.
Figure 4-57 Reboot the router
Figure 4-58 Password
57