Quick Setup; Operation Mode; Network - TP-Link TL-WA5110G User Manual

Operating Mode, Signal, SSID, Channel, Mode, MAC Address and IP Address.
Traffic Statistics - This field displays the AP's traffic statistics.
System Up Time - The time of the AP running from it's powered on or

5.3 Quick Setup

Please refer to Section

5.4 Operation Mode

The AP supports three operation modes, AP Client Router, AP Router and AP. Please select
one your want. Click Save to save your choice. Figure 5-2:
AP Client Router: In this mode, the device enables multi-user to share the Internet from
WISP. All LAN ports share the same IP from WISP through Wireless port. While connecting to
WISP, the Wireless port works as a WAN port in AP Client mode. The Ethernet port acts as a
LAN port.
AP Router: In this mode, the device enables multi-user to share the Internet via ADSL/Cable
Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless
port acts same as a LAN port while in AP mode.
AP: In this mode, the device allows wireless communication devices to access a wireless
network by using WIFI. The Ethernet port and the wireless port both work as LAN ports.

5.5 Network

Click Network on the main menu. You can configure the IP parameter on the following page .
IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default:
192.168.1.1).
Subnet Mask - An address code that determines the size of the network. Normally use
3.2: "Quick Setup."
Figure 5-2 Operation Mode
Figure 5-3 Network
62
reset.