Statistics - TP-Link TL-WA5110G User Manual

Note:
Be sure to change the router's default password to a very secure password. In AP mode, port 80
is only supported. The web management port number will be set to 80 when the operation mode
changes to AP mode.

4.13.11 Statistics

The Statistics page (shown in Figure 4-61) displays the network traffic of each PC on the LAN,
including total traffic and traffic of the last Packets Statistic interval seconds.
Current Statistics Status - Enabled or Disabled. The default value is disabled. To
enable, click the Enable button. If disabled, the function of DoS protection in Security
settings will be ineffective.
Packets Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds from the pull-down list. The Packets Statistic interval indicates the time section
of the packets statistic.
Sorted Rules - Here displays sort as desired
Statistics Table:
IP Address
Packets
Total
Bytes
Current
Packets
Bytes
ICMP
Tx
UDP
Tx
Figure 4-61 Statistics
The IP Address displayed with statistics
The total amount of packets received and transmitted by the router.
The total amount of bytes received and transmitted by the router.
The total amount of packets received and transmitted in the last Packets
Statistic interval seconds.
The total amount of bytes received and transmitted in the last Packets
Statistic interval seconds.
The total amount of the ICMP packets transmitted to WAN in the last
Packets Statistic interval seconds.
The total amount of the UDP packets transmitted to WAN in the last
Packets Statistic interval seconds.
59