IMPORTANT!
Ensure the hose is not run over by the appliance when pushing into the cabinetry to prevent damage and possible water leaks.
●
●
Position the appliance into the cabinetry
Coil the excess water hose and power cord flat behind the appliance (A).
1
Push the appliance into the cabinetry until the anti-tip bracket overlaps the
2
rear top edge of the appliance (B).
IMPORTANT!
Ensure the appliance is centered.
●
●
Ensure the anti-tip bracket overlaps the refrigerator by a minimum 2 3/8"
●
●
(60mm) for a secure hold (C).
2 3/8" (60mm) min.
overlap
Refer to 'Attach anti-tip bracket' for more information.
!7
POSITIONING INTO CABINETRY
C
Anti-tip
bracket
B
A
21