Internal box
Remove hanging brackets
Remove the M8 washers and M8 nuts from the M8
Door panel
1
B
studs at the top the door (A) using the hex key and
attachment kit
spanner. Keep the washers and nuts to reuse later.
Remove the hanging bracket from the top of each
2
door and set aside (B) for later installation.
Side bracket
(10)
Side strap
(10)
#8x16 mush washer
(Custom) screw (24)
Door handle kit
M5x25 pan head socket
screw (8)
#8 x 16
Mush Washer
Twin Thread
Philips Screw
Tools
Hex key
FPA spanner
Powered driver
@0
DOOR PANEL INSTALLATION — CUSTOM
A
B
Attach the door and drawer handles (C)
Align the handle holes with the door panel
3
holes and secure with M5x25 pan head
socket screws (4).
Attach the hanging brackets (D)
Align the bracket to the holes and
4
secure with
#8x16 mush washer screw
(12).
Attach side brackets and straps (E)
Align the brackets and straps to the holes
5
on the side of the panel and secure with
screw (12).
#8x16 mush washer
E
C
D
D
C
29