Fisher & Paykel ACTIVESMART RS36W80 Series Installation Manual page 32

Tools Attach the door panels
Open the door and loosen the M5x10 cross-head
1
screw (do not remove) at the sides of the doors (A).
Hang the door panel by inserting the M8 studs
2
through the holes of the hanging bracket (B).
FPA spanner
Slide the forks of the side brackets onto the
3
screws of the door (C).
Screw the M8 washer and nut to the stud (D),
4
and re-tighten the side screws (E) to fix the
door panel (do not fully tighten). This will
Hex key
allow opening the door without affecting
adjustment of the door panel.
Cross-head screwdriver
30
@0 DOOR PANEL INSTALLATION — CUSTOM
E
A
C
B