Fisher & Paykel ACTIVESMART RS36W80 Series Installation Manual page 38

Internal box
Attach the covers
Open the top door. Attach the top cover
Door / d rawer
1
C
(A) firmly over the top stud on the handle
trim install kit
side of the door.
Dual adhesive tabs
(10)
Top cover
(1)
External box
Door side trim
Attach the door side trims
(2)
Install the side trims by inserting into the panel gaps on each
2
side of the door (C). Align the trim to the top of the door and
press evenly into the panel gap until fully seated (D).
Drawer side trim
(2)
Drawer top trim
(2)
36
@4 DOOR AND DRAWER TRIMS INSTALLATION
A
C
Attach the drawer top and side trims
Peel off two dual adhesive tabs and press them
3
together to form a pair (E). Remove the adhesive
backing on one side only.
Press firmly to the underside of the drawer top trim
4
in the indicated locations (F).
E
Remove the remaining adhesive backing from the dual adhesive tabs.
5
Locate the trim against the back surface of the panel and press down firmly.
6
Ensure the trim is fully seated against the drawer surface (G).
Install the side trims by inserting into the panel gaps on each side of the
7
door(s) (H).
– Make sure the cabinet is centered to prevent the side trims from
interfering with the cabinet.
D
F
G
H