IMPORTANT!
Ensure the hose is not run over by the appliance when pushing into the cabinetry to prevent damage and possible water leaks.
Position the appliance into the cabinetry
1
Coil the excess water hose and power cord flat behind the appliance (A).
2
Push the appliance into the cabinetry until the anti-tip bracket overlaps the
rear top edge of the appliance (B), and the doors are in line with the cabinet
frame.
IMPORTANT!
Ensure the appliance is centered.
Ensure the anti-tip bracket overlaps the refrigerator by a minimum 60mm
for a secure hold (C).
60mm min.
overlap
Refer to 'Attach anti-tip bracket' for more information.
22
!7
POSITIONING INTO CABINETRY
C
Anti-tip
bracket
B
A
A