Fisher & Paykel ACTIVESMART RS36W80 Series Installation Manual page 41

Internal box
Break off the datum lip to each side trim bracket and discard.
1
Repeat for all side trim brackets.
Cabinet side
D
trim install kit
Side trim bracket
(6)
#8x16 mush washer
screw (12)
External box
Cabinet side trim
#8 x 16
Mush Washer
(2)
Twin Thread
Philips Screw
For 80" (2032mm) cavity
installation only
Tools
Measure 4" (102mm) from the top
2
of the side trim with a square ruler
and mark a cutting line (A).
Cut along the line using a fine
3
tooth hacksaw to a length of 76"
(1930mm) (B).
Hacksaw
IMPORTANT!
Ensure the cut is straight and square
● ●
as this is an exposed surface.
Ensure the plastic part does not
Cross-head screwdriver
● ●
bend as this can cause visual
stress marks.
Repeat for the remaining side trim.
Pencil
@6 CABINET TRIMS INSTALLATION — [B] FIXED SCREW METHOD
Discard
Aluminum
Position three side trim brackets on one side trim. Refer to (B)
4
for bracket locations.
Open the French doors. Measure 2" (50mm) from the front
5
of cabinet (from behind the doors), to the front of the alcove
and accurately mark a vertical line (C).
Align the bracket edge with the marked line and fix the bracket
6
to the cabinetry with #8x16 mush washer screws (D).
Repeat on the opposite side.
IMPORTANT!
Ensure correct positioning of bracket to preven inaccurate fitting
of side trim or gaps existing between side trim and appliance.
~ 69" (1753mm)
A
Plastic
~ 40" (1016mm)
~ 10" (254mm)
0
2" (50mm)
B
Front of
cabinet
C
D
39