Single Installation - Align Appliance Into Cabinetry - Fisher & Paykel RS2484S Installation Manual

Pushing into the cabinetry
Tools
Cross-head
screwdriver
Ruler
Pencil
Aligning the depth gauges
L L F I
Illustrations may differ from your purchased appliance.
SINGLE INSTALLATION — ALIGN APPLIANCE INTO CABINETRY
7 1/16" (180mm)
O N L L F I O N L L F I
Roll the appliance carefully into the cabinetry until the anti-tip bracket overlaps the
back edge of the appliance.
Ensure the bracket overlaps the appliance by a minimum 7 1/16" (180mm) for a
z
secure hold.
Be careful not to run over the water hose and power cord when rolling in
z
the appliance.
On the 'Cabinet depth alignment' side of the depth gauges, mark the step on both
sides of the door based on the thickness of the door panel.
Example illustration show the door panel thickness 1" (25.4mm) marked on the
z
gauges.
Check if the gaps between appliance and cabinetry side walls are
L L F I O N
even on left and right sides.
Right
Left
39