Fisher & Paykel ACTIVESMART RS36W80 Series Installation Manual page 30

IMPORTANT!
Place the template at the back side of the drawer panel.
● ●
Using the installation template
(for drawer panel)
1A
Align top of template with
top edge of drawer panel.
1B
Align left side edge of
template with left side edge
of drawer panel.
2
Mark drill locations of screw
holes for the left hanging
bracket and side brackets.
Drill screw holes (2mm)
to the marked locations.
28
849548
@0 DOOR PANEL INSTALLATION — CUSTOM
6
To mark the drill locations of middle screw holes, align the
screw holes of drawer hanging bracket with right and left
drilled screw holes. Drill screw holes to marked locations.
DRAWER PANEL TOP EDGE
DRAWER PANEL TOP EDGE
DRAWER PANEL
TEMPLATE
849548
DRAWER PANEL
TEMPLATE
849548
back side of front side of
drawer panel door panel
3
Move the same template to
right hand side of drawer panel.
DRAWER PANEL TOP EDGE
DRAWER PANEL TOP EDGE
DRAWER PANEL
TEMPLATE
849548
DRAWER PANEL
TEMPLATE
849548
4A
Align top of template
with top edge of drawer
panel.
4B
Align right side edge of
template with right side
edge of drawer panel.
5
Mark drill locations of
screw holes for the left
hanging bracket and
side brackets. Drill screw
holes (2mm) to the
marked locations.