Keysight Technologies E6640A Getting Started Manual page 91

Step
5 Transport the
Transportable License
from Source Instrument
6 Get New License from ASM
Transportation Web page
7 Save License File to USB
Flash Drive
Getting Started Guide
Action
a On the source instrument, locate the desired
license to be transported and highlight it. Its
option designator should include the letters
"TP".
b .Right-click on the mouse and select
.
Delete
c Click in the License Deletion
Yes
Confirmation dialog box.
d After a few seconds, a Transport License
dialog box will appear. Click
the *.url files on the USB flash drive, with a
name such as "PhaseNoise_License.url"
a Insert USB flash drive into PC that is
connected to the internet
b On the PC, locate the *.url file on the USB
flash drive that was saved in the previous
step and click on it.
c After a few seconds, the ASM Transportation
Web page will appear. One field, the New
Host ID will be empty.
d Enter the Host ID of the target instrument
(step 3 above) into the field marked New
Host ID.
e Click .
Submit
a The ASM Transportation Web page will
indicate that a license file is available and
display two links to the license file.
Right-click on the license file and select
Save Target As...
b Save the license file to the root level of the
USB flash drive, keeping the ".lic" file
extension.
c Close the Save dialog and exit the ASM
Transportation Web page.
Test Set Operating System
Notes
Be sure you are selecting a transportable
license and not a fixed perpetual license.
Although you are "deleting" the
transportable license, the ultimate action
will be to transport it.
The information in this dialog box will be
and save
OK
used to issue a new license for the target
instrument.
The PC must have an internet connection
and an available USB port.
Most of the fields have been populated
from the information in the *.url file.
Be very careful when entering the New
Host ID. A mistake made in entering the
New Host ID will result in an invalid license
being issued. Be sure there is a comma
between the model number and serial
number. There should be no spaces in the
Host ID.
Either link can be used to either display or
save the license file.
The license file must be saved to the root
level of the USB flash drive for it to be
recognized by the target instrument.
4
91