Keysight Technologies E6640A Getting Started Manual page 116

5
Using Microsoft Windows Operating System
Table 3-3
Step
4 Click
5 Check the box labeled
6 To add users, click
Figure 3-1 Basic setup for remote desktop operation
Setting up the remote computer
The procedure depends on whether the Remote Computer to be set up is running
Windows XP, Windows 7, or another version of Microsoft Windows.
Remote computer running Windows XP or Windows 7 Windows XP and Windows
7 include the Remote Desktop Connectivity Client software, so no additional setup
is required.
Remote computer running another version of Windows You can use any 32-bit
version of Windows (Windows 95, 98, ME, NT4, or 2000) to install and run the
Client software for Remote Desktop Connectivity. However, you need to have
available a Windows XP or Windows 7 installation CD-ROM, because that contains
the Client software.
116
Setting up a remote desktop connection
.
Remote Settings
Allow Remote
connections to this computer,
Assistance
if it is not already checked.
Select Users
Follow the on screen instructions.
•
The following instructions relate to software provided by Microsoft
Corporation. Keysight offers no warranty regarding the operation of such
software. The procedure described here may be changed by Microsoft at some
future time.
Notes
A System Properties window appears, with the
Remote tab displayed.
, .
Add
Getting Started Guide