Battery Replacement - Chauvet DJ 4BAR Flex Q Quick Reference Manual

EN
Foodswitch Battery
The wireless footswitch uses a 9-volt battery located under the battery cover on the bottom of the product, which can be
replaced when necessary.

Battery replacement

To replace the battery in the wireless footswitch:
1. Turn the power switch to the Off position.
2. Remove the battery cover by removing 2 screws with a Phillips-head screwdriver.
3. Remove the old battery from the housing and unplug it from the leads.
4. Replace with a new 9-volt battery, ensuring that the positive (+) and negative (-) leads correspond to the correct
electrodes on the battery.
5. Place the battery into the housing and cover with the battery cover.
6. Secure the battery cover with the 2 Phillips-head screws.
DO NOT over-tighten the screws!
5
QUICK REFERENCE GUIDE
4BAR Flex Q QRG Rev. 1