G1 SCBA Radio Pairing Guide |
Step 7.
Writing the Bluetooth Audio Pairing Tag:
(A)
Place RFID Tag on the RFID Reader / Writer.
(B)
Select the Write G1 Tag icon (top-right side of A2).
(C)
Click "OK" on the "Tag was successfully written" dialog.
Step 8.
Verifying the Information Written to the Tag:
(A)
Place RFID Tag on the RFID Reader / Writer
(B)
Select the Read G1 Tag icon (top-right side of A2 application)
(C)
The "Found Tag" screen will appear.
(D)
Confirm the tag's Bluetooth Address matches the Radio.
The Radio Pairing tag is now created & can be used to pair this radio with a
G1 SCBA.
Rev. 2-11-2019
Motorola APX
Note: Hovering over the icons will
also show "Write Tag" or "Read Tag".
Page 7 of 11