Clearing Radio Pairing Info From The G1 Scba; Method 1 – Battery Removal; Method 2 – Pair New Radio; Clearing Radio Pairing Info From The Motorola Apx Radio - MSA G1 SCBA Pairing Manual

For motorola apx 4000 series, apx 5000 series, apx 6000 series, apx 7000 series, apx 8000 series

Operating manual (97 pages)

Instruction manual (88 pages)

Manual (24 pages)

Table of Contents

G1 SCBA Radio Pairing Guide |

Best practice is to: Clear the pairing information from both devices—the radio & the G1 SCBA. This prevents the G1 SCBA from

connecting to a previously-paired Bluetooth radio during the next start-up.

Clearing G1

SCBA Pair

There are 3 methods for removing stored Radio pairing information from the G1 SCBA.

All three methods are effective on G1 SCBAs configured with "Bluetooth Pair Save" being "Disabled"

•

The "Battery Removal Method" is a popular method, however, note that this method is NOT effective when the G1 SCBA is

configured with the "Bluetooth Pair Save" setting set to "Enabled".

Method 1 – Battery Removal

Step 1.

Remove G1 SCBA Battery

Bluetooth audio pair info is cleared from the G1 SCBA.

"Clearing Radio Pairing Info from the Motorola APX Radio" in the next section.



Method 2 – Pair New Radio

Step 1.

Pair a different Bluetooth Motorola APX Radio with the G1 SCBA using the new radio's Bluetooth Audio Pairing

Tag, as described in the "Pairing a G1 SCBA and Motorola APX Radio" section.

Bluetooth audio pair info on the G1 SCBA is changed to the pair info for the new radio.

"Clearing Radio Pairing Info from the Motorola APX Radio" in the next section.



Method 3 – Use a "Reset Bluetooth Pairing" Tag

If not yet created, create a "Reset Bluetooth Pairing" Tag in the A2 software, under "G1 Tags" tile

G1 Tags"

Expand "Reset Tags" list



Step 1.

Press & hold either of the

Step 2.

Place the "Reset Bluetooth Pairing" Tag over the G1 Power Module RFID Target.

Bluetooth audio pair info is cleared from the G1 SCBA.

"Clearing Radio Pairing Info from the Motorola APX Radio" in the next section.



Clearing APX

Clearing Radio Pairing Info from the Motorola APX Radio

Radio Pair

Step 1.

Single & Dual Display Radios: Press & Hold Bluetooth on/off button (2-dot side bottom button).

The radio will give an audible indication when pairing is removed.

- Dual display radios can also be cleared using their Bluetooth Menu Screens instead.

Bluetooth audio pair info is cleared from the Motorola APX Radio.

If not done already: Clear the pairing info from the previously connected G1 SCBA's pair history using the process

described in in the previous section: "Clearing Radio Pairing Info from the G1 SCBA".

Rev. 2-11-2019

Motorola APX