Creating A G1 Scba Motorola Apx Radio Pairing Tag - MSA G1 SCBA Pairing Manual

For motorola apx 4000 series, apx 5000 series, apx 6000 series, apx 7000 series, apx 8000 series

Hide thumbs Also See for G1 SCBA:

Operating manual (97 pages)

Instruction manual (88 pages)

Manual (24 pages)

Table Of Contents

Table of Contents

G1 SCBA Radio Pairing Guide |

Radio ID

Pair Tag

To pair the radio to the G1 SCBA, a "Bluetooth Audio Pairing Tag" needs to be created in the A2 Software.

Once the Pairing Tag is created, it can be applied to the SCBA, which "programs" the SCBA to connect to

that specific radio.

Step 1.

Launch the MSA A2 Software

Step 2.

Select the "G1 Tags" Tile on the A2 Dashboard (Under the "G1 Devices"

column)

Step 3.

Select tag type: "Bluetooth Audio Pairing Tags"

Step 4.

Ensure that your PC's Bluetooth adapter is on, and selected for use in A2, and

that your RFID Reader/Writer is connected and ready.

Both modules appear in lower left of A2 display. Generally they will

•

appear as the computer's name, or as "localhost".

•

If either is not visible, and also not selectable under "Select Other

device": disconnect and reconnect the hardware;

•

Restart the A2 service if necessary.

Step 5.

Turn on the Motorola APX Radio using the volume knob.

Step 6.

Making the Motorola APX Radio Discoverable, & Discovering it in A2:

(A)

For Single Display Radios:

a. Press & Hold the middle (1-dot) button for approx. 30 seconds.

b. While continuing to hold radio button down, select

"Discover Devices" in A2.

For Dual Display Radios:

a. Turn on "Visibility" via the Radio Bluetooth menu

b. Select "Discover Devices" in A2.

(B)

Click the discovered Motorola APX Radio in A2 to select it.

Rev. 2-11-2019

Motorola APX