Advertisement
Manual functions
The manual functions can be used in addition to program mode.
•
Blend : allows you to freely control the way you want to blend.
Blend
Press the <<Blend>> button, the screen indicates « 5 »
corresponding to the speed but you can choose the blending
speed from 1 to H (max.) by pressing the setting <<+/->> buttons (I).
Then press <<Start/Cancel>> button and 2 minutes appears on the
screen. The blender stops after 2 minutes or you can press <<Start/
Cancel>> button to stop the operation. The appliance beeps 5 times.
Before each blending process, vacuum function will be operated for
10 seconds.
Vacuum : allows you to freely to add vacuum effect before or
•
Vacuum
after the automatic or manual program. Before using the
<<Vacuum>> function, well place the lid cap. Press <<Vacuum>>
button, the screen indicates <<01:40>> corresponding to the vacuum
time. Press <<Start/Cancel>> button. Once the program is complete,
press the middle of lid cap
CLEANING
• Clean the jar immediately after every use.
Automatic cleaning function:
•
Clean : Add 1 drop of dish detergent to 1 litre of water and press
Clean
the <<Clean>> button. The cleaning program takes 30 seconds
to complete.
• The vacuum function will be operated for 10 seconds before the cleaning
program starts.
• Adding too much dish detergent may cause bubbles and spill out from
the jar. After the cleaning program is complete, use a sponge to finish
washing the jar.
• The automatic cleaning program helps to remove residue from the jar,
but may not be as effective as manual cleaning. When the cleaning
program is complete, rinse the jar under water and use a cloth to clean
the jar.
and remove the lid cap, then open the lid.
EN
41
Advertisement
