Advertisement
USING YOUR APPLIANCE
• Put the appliance on a flat, stable, heat-resistant surface away from
sources of heat or water splashes.
• Always disconnect the appliance from the mains before changing or
touching parts.
• Position the jar (A3 or B3) correctly on the motor unit (Fig. 4).
Using the borosilicate glass container to heat food
Hot jar
• Add the ingredients into the jar without exceeding the maximum level
indicated:
– 1400ml max for hot preparation
Automatic function:
How to use :
• Lock the lid on the jar and place the lid cap in position on the lid. The
appliance only starts up once the jar and lid are correctly in place.
• When you plug in the appliance and switch it on, it will make a beep,
and the screen will light up.
• The appliance will be in standby mode. At this stage, you can select a
program by pressing the corresponding button. Button light flashes and
the recipe time information will be displayed.
• Press the <<Start/Cancel>> button. Then the appliance starts to work
automatically.
• At the end of the recipe, the blender stops automatically. The appliance
beeps 5 times.
• You can also stop the blending during the cycle by pressing the <<Start/
Cancel>> button to cancel the program.
• For hot programs and Reheat function, if the power shuts off during
cooking, within 2 minutes if the power is turned back on, the appliance
will restart automatically.
– If the appliance is left unused for 1 minute, the screen light will go off
and only the <<Start/Cancel>> button will remain on.
CAUTION :
• Do not shake the motor unit or the jar when the blender is in use.
CAUTION: After running one program, especially if a long processing
time, let the blender rest for minimum 5 minutes before operating it
again.
34
Advertisement
