Controls & Components - Grizzly G0834 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–6 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
Control Panel
A B
Figure 1. Location of ON/OFF buttons.
A. OFF Button: Stops motor when pressed and
disables ON button. Remains depressed until
manually reset. Reset by twisting OFF button
clockwise until it springs outward.
B. Power Lamp: Illuminates when machine is
connected to power.
C. ON Button: Starts motor when pressed (only
if OFF button is not in depressed position).
-4-
manual BEFORE
C
Table Controls
D
E F
H
I
Figure 2. Location of main table controls.
D. Outfeed Table: Supports workpiece after it
passes over cutterhead. For safety purposes
and optimum cutting results, the outfeed
table must be properly adjusted so it is even
with highest point of cutterhead insert rotation
(aka TDC). Refer to Page 37 for more details.
E. Fence: Supports workpiece laterally as it
moves across cutterhead; determines angle
of cut when edge or bevel jointing.
F. Cutterhead Guard: Covers cutterhead
until pushed out of the way by workpiece
during operation. When workpiece leaves
cutterhead, guard springs back to its starting
position.
G. Infeed Table: Supports workpiece before it
reaches cutterhead. Position of infeed table
relative to cutterhead inserts determines
depth of cut.
H. Table Locks: Tighten to secure position of
infeed and outfeed tables; loosen to allow
vertical table movement with adjustment
handwheels.
I. Outfeed Table Adjustment Handwheel:
Adjusts outfeed table position (when outfeed
table lock and positive stop bolts are
loosened).
J. Infeed Table Adjustment Handwheel:
Adjusts position of infeed table (when infeed
table lock is loosened).
Model G0834 (Mfd. Since 12/17)
G
H
J