Identification - Grizzly G0834 Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
Fence
Outfeed
Table
Outfeed Table
Lock
Outfeed Table
Handwheel
For Your Own Safety Read Instruction Manual Before Operating Jointer
a) Wear eye protection.
b) Always keep cutterhead and drive guards in place and in proper operating condition. ALWAYS
replace cutterhead guard after rabbeting operations.
c) Never make jointing or rabbeting cuts deeper than
d) Always use hold-down or push blocks when jointing material narrower than 3" or planing
material thinner than 3".
e) Never perform jointing, planing, or rabbeting cuts on pieces shorter than 14" in length.
Model G0834 (Mfd. Since 12/17)

Identification

Control
Panel
Fence
Lock
Cutterhead
Guard
Depth-of-Cut
Infeed Table
Lock
Infeed Table
Handwheel
Tilt Lock
⁄ " or planing cuts deeper than
1
8
Infeed
Table
Scale
Fence Tilt
Handle
5" Dust
Port
⁄ ".
1
16
-3-