Lubrication - Grizzly G0834 Owner's Manual

Lubrication

Since all bearings are sealed and permanently
lubricated, simply leave them alone until they
need to be replaced. DO NOT lubricate them.
It is essential to clean components before lubri-
cating them because dust and chips build up on
lubricated components and make them hard to
move. Simply adding more grease to them will not
yield smooth moving components.
Figure 35. Fence lubrication locations.
Clean the components below with mineral spirits
or other oil/grease solvent cleaner and shop rags.
Fence & Carriage
Lube Type .. Model SB1365 or ISO 68 Equivalent
Lube Amount ..................................... As Needed
Lubrication Frequency ................................. Daily
Place one or two drops of oil on the fence pivot
points (see Figure 35) as needed. Before lubricat-
ing the fence carriage ways, clean them with min-
eral spirits. Apply a thin coat of oil along the length
of the ways (see Figure 36). Move the fence back
and forth to distribute the oil.
Figure 36. Fence carriage slide lubrication
locations.
SB1365—South Bend Way Oil-ISO 68
Engineered for the high pressure exerted on
horizontal or vertical ways and slides. Protects
against rust and corrosion. Ensures stick-free,
smooth motion which maximizes finishes and
extends the life of your machine. Won't gum up!
12 oz. AMGA#2 (ISO 68 Equivalent)
Figure 34. SB1365 Way Oil.
-31-
Model G0834 (Mfd. Since 12/17)