Kessel SG 400 V Mono Original Operation Manual page 62

5.4 Settings, menu
General information
In the operating mode, the system settings can be displayed and adjusted on
the display (➲ Chap„7. Configuration menu overview").
Activating operating mode
Press the OK [18-2] key on the control panel, the display's backlight comes on
and the |0 System info | (see Fig. [20]) menu appears
• confirm with OK [18-2], level 1 of the menu (➲Chap„7. Configuration menu
overview") is activated.
Menu overview
The control menu is split into four menu areas:
0 System info - selected system, configured sensors, current measured values,
possibly incidents or error messages
1 Information - displays the operating data (e. g. voltage, current measured
values, log book or set parameters)
2 Maintenance - activities relevant for maintenance (e. g. pump(s) On/Off ,
self-diagnosis, maintenance date and interval)
3 Settings - set the switching level, sensor and system configuration, configu-
ration of the modem interface, reset the control unit
62
Fig. 18 Pos.No.
Installation and operating manual
4
[18]
Operating keys
[1] Scroll up
[2] Confirm by pressing „OK"
[3] Scroll down
[4] Press "Esc" to go back
010-532_05