Kessel SG 400 V Mono Original Operation Manual page 40

1. Notes on this manual
The following stylistic conventions should facilitate navigating this manual:
Symbol
[1]
[1-5]
➊➋➌➍➎➏➐➑➒➓
1 Check wether manual control
has been activated.
▶ Press OK.
✓ Product is ready for operation.
➲ Chap "2. Safety"
|Define maintenance
interval|
Bold type
Italics
40
Explanation
see Figure 1
Position number 5 in Figure 1
Handlungsschritt in Abbildung
Action prerequisite
Action step
Action result
Cross-reference to Chapter 2
Screen text
particularly important or safety-relevant
information
Variant or additional information (e. g.
only applies for ATEX variant)
Technical information or instructions
which must be paid particular attention.
Installation and operating manual
2. Safety
The following symbols are used:
Icon
Observe the instructions for use
WEEE icon, product governed by RoHS Guideline
Warns of a hazard for persons. Ignoring this warning can
lead to serious injuries or death.
WARNING
Warns of a hazard for persons and material. Ignoring
this warning can lead to serious injuries and material
CAUTION
Meaning
Isolate device!
CE marking
Warning, electricity
ground before use
damage.
010-532_05