Exerpeutic 4230 Owner's Manual page 20

ADJUSTMENTS
Fig. C
Front Post (17)
Spring Knob (7)
Adjusting the Handlebar Height
TIP: When adjusting the height of Front Post (17), the STOP line cannot be higher than the
edge of plastic bushing. See Fig. C.
Loosen the Spring Knob (7) by turning it COUNTER-CLOCKWISE direction until it can be pulled
out. Pull out the Spring Knob (7) and then slide the Front Post (17) up or down and settle on the
desired height. Lock the Front Post (17) in place by releasing the Spring Knob (7) and sliding the
Handlebar Post (17) up or down slightly until the Spring Knob (7) "POPs" down into the locked
position. Tighten the Spring Knob (7) in a CLOCKWISE direction.
Seat Post (10)
Spring Knob (7)
Adjusting the Seat Post Height
Loosen the Spring Knob (7) by turning it in the COUNTER-CLOCKWISE direction until it
can be pulled out. Pull out the Spring Knob (7) and then slide the Seat Post (10) up or
down direction to the suitable position. Lock the Seat Post (10) in place by releasing the
Spring Knob (7) and sliding the Seat Post (10) up or down slightly until the Spring Knob
(7) "pops" down into the locked position. For added safety, tighten the Spring Knob (7) in
a clockwise direction.
NOTE: When adjusting the height of seat post, the STOP line cannot be higher than
the edge of plastic bushing. See Fig. C.
.
18